admin-plugins author calendar category facebook post rss search twitter star star-half star-empty

Tidy Repo

The best & most reliable WordPress plugins

Freemium One AirPod Not Working? 10 Fixes to Get Both Playing Again

One AirPod Not Working? 10 Fixes to Get Both Playing Again

Plugin Author:

rizwan

November 2, 2026

Tutorials

One AirPod not working is usually caused by a dead battery on that side, dirt in the speaker or charging contacts, or a confused Bluetooth connection, and in most cases the AirPod itself is fine. You put in your AirPods, play a song, and only one side works. The other is silent or keeps dropping out.

The following fixes have worked the most, starting with the easiest ones. They apply to regular AirPods and AirPods Pro, and I’ll note where newer models do things a bit differently.

Why Is Only One AirPod Working?

Only one AirPod works when that side loses charge, loses its connection, or gets blocked, because each AirPod has its own battery and its own link. The two AirPods also communicate with each other, so a small glitch can leave one of them out.

Common causes include:

  • The quiet AirPod has a dead or very low battery
  • Dirt or earwax blocking the speaker mesh
  • Dirty charging contacts, so one AirPod never charges in the case
  • The audio balance on your iPhone is pushed to one side
  • A Bluetooth glitch between the AirPods and your device
  • Old firmware on the AirPods
  • Hardware damage from a drop or water

Quick Fix to Try First

Place both AirPods in the charging case, close the lid, and wait about 30 seconds. Then open the lid near your iPhone and put them back in. This simple reconnect solves it for a lot of people, especially when one side stopped working out of nowhere.

How to Fix One AirPod Not Working

If the quick fix didn’t help, go through these one by one and test both sides after each step.

1. Check the Battery on Both AirPods

A drained battery on one side is the most common reason for a silent AirPod. One AirPod often gets used more for calls, or doesn’t sit properly in the case, so it runs out first. Open the case lid next to your unlocked iPhone to see the battery level of each AirPod and the case. If one side is at zero, leave both in the case for 20 to 30 minutes and check again.

2. Clean the Charging Contacts

If one AirPod never charges, dirt on the charging contacts is the likely cause, because lint and grime stop power from reaching it. Clean them like this:

  • Wipe the metal contact at the bottom of each AirPod stem with a dry, soft cotton swab.
  • Clean the contacts inside the case with a dry swab or a soft, clean brush.
  • Don’t use liquids or sharp objects in the charging ports, as Apple warns against both.
  • Put the AirPod back and check that the case light shows it’s charging.

3. Clean the Speaker Mesh

When an AirPod is connected and charged but sounds very faint or muffled, earwax or dust is usually covering the speaker mesh. Gently brush the mesh with a dry cotton swab or a soft-bristled brush, without pushing anything into the holes. On AirPods Pro, you can rinse just the removable ear tips with water and let them dry fully, but never rinse the AirPod itself.

4. Check the Audio Balance on Your iPhone

iPhone Audio and Visual settings with the Balance slider centered

If the left and right balance on your iPhone is pushed to one side, one AirPod goes silent even though nothing is wrong with it. This one is easy to miss.

  1. Go to Settings > Accessibility > Audio & Visual.
  2. Move the Balance slider back to the middle, between L and R.
  3. Check Mono Audio. Turning it on sends the same sound to both sides, which helps if you often wear just one AirPod.

5. Turn Bluetooth Off and On

A quick Bluetooth reset clears small connection issues. Open Settings > Bluetooth, turn it off, wait about 10 seconds, and turn it back on. It may seem too easy, but it fixes a fair number of one-sided audio problems.

6. Restart Your iPhone

If toggling Bluetooth didn’t help, restart the phone. Hold the side button and a volume button until the slider shows up, slide to power off, and turn it back on after 30 seconds. Then connect the AirPods again and play some audio to test.

7. Turn Off Automatic Ear Detection

AirPods settings on iPhone showing Automatic Ear Detection

Automatic Ear Detection pauses audio when it thinks an AirPod is out of your ear. If the sensor on one side is dirty or acting up, that AirPod may think it isn’t being worn and stay quiet.

With your AirPods connected, go to Settings, tap your AirPods name near the top, and turn off Automatic Ear Detection. If both sides work now, clean the sensor area on that AirPod and try turning the feature back on later.

8. Forget and Reconnect Your AirPods

If the fixes so far didn’t work, the pairing itself may be the problem. Forgetting the AirPods gives them a fresh connection:

  1. Go to Settings > Bluetooth and tap the info button next to your AirPods.
  2. Tap Forget This Device and confirm.
  3. Put both AirPods in the case, open the lid near your iPhone, and follow the setup steps on screen.

Forgetting them on one device also removes them from other devices signed in to the same Apple Account.

9. Reset Your AirPods

A full reset is the strongest fix you can do at home, and the steps depend on your model.

For AirPods (1st to 3rd generation) and AirPods Pro (1st and 2nd generation):

  1. Put both AirPods in the case, close the lid, and wait 30 seconds.
  2. Forget the AirPods in Settings > Bluetooth as shown above.
  3. Open the lid and press and hold the setup button on the back of the case for about 15 seconds.
  4. When the status light flashes amber and then white, follow the steps on your iPhone to reconnect.

On AirPods 4 and AirPods Pro 3, there’s no setup button. Open the lid and double-tap the front of the case while the light is on, again when it flashes white, and a third time when it flashes faster. When the light flashes amber and then white, reconnect them.

10. Update the AirPods Firmware

Old firmware can cause connection bugs, including one side dropping out. AirPods update on their own when they’re in the case, charging, and near an iPhone or iPad on Wi-Fi, so plug the case in and leave it near your phone for a while. You can check the current version by tapping your AirPods name in Settings and scrolling to the About section.

What If One AirPod Still Doesn’t Work?

If one side still won’t play or charge after all of this, it’s most likely a hardware problem. Older AirPods have batteries that wear out over time, and one side can fail first. Drops and water damage can also cause it.

Contact Apple Support or go to an Apple Store. If your AirPods are still under warranty or AppleCare, you may be able to replace just the one AirPod that’s not working, which costs less than a new pair.

How to Keep Both AirPods Working

  • Keep the AirPods in the case when you’re not using them
  • Clean the charging contacts and speaker mesh every few weeks
  • Charge the case before the battery runs completely flat
  • Keep the AirPods away from water and sweat buildup
  • Let the AirPods sit in the case near your iPhone so firmware updates can install

Final Thoughts

If one AirPod doesn’t work, it’s usually not broken. Charge both sides, clean the contacts and speaker mesh, and check the audio balance on your iPhone. Most cases are solved with those three steps.

If not, forgetting and resetting your AirPods will usually get both sides playing again. Which AirPod stopped working for you, the left or the right, and what got it working again? Let us know in the comments.